Titanium PT616 Pipe Truck

Available options

  • Open canopy ROPS/FOPS
  • Enclosed cabin ROPS/FOBS with AC and Heat
  • Air/hydraulic power pack package
  • Firwin exhaust blanket minewrap 2
  • Firwin exhaust blanket minewrap 3
  • Firwin hard coat heat protection on engine turbo and manifold
  • Fire extinguisher 20lbs with mounting bracket
  • ANSUL 6-nozzle check fire suppression system with engine shut-down
  • ANSUL 6-nozzle manual fire suppression system with engine shut-down
  • Wheel chocks with mounting brackets
  • Air/water header mounted on scissor deck
  • Air/water reels mounted on front carrier bumper and hosed to headers mounted on scissor deck
  • HID 2 x work lights mounted on scissor deck
  • Deltek LED strobe light 
  • Upgrade to pneumatic operator suspension seat with seatbelt
  • Upgrade to pneumatic passenger suspension seat with seatbelt
  • 4X poluerthane fill tires 12:00 x 20
  • 4X solid tires 12:00 x 20
  • Lincoln autolube
  • FLOMAX fast filling diesel
  • Additional 2X front headlights
  • Storage for 20 liter oil pail
  • Machine monitoring of hydraulic oil level, fuel coolant, engine air filter condition, hydraulic pressure and return filtration
  • 3rd gear lock-out upon customer request
  • Torque lock up and engine brake for MB 904
  • Elevating table attachment 2,268 kg (5,000 lbs) capacity for ventilation fan with protective bellow and control valve
  • Hydraulic attachment kit for scissor deck
  • Kit for crane and pipe jacks for installation of schedule 40 – 2”, 4”, 6” diameter air and water pipes
  • 12 volt power supply for mine radio
  • Link One part source files
General Specifications
Seating Capacity 2 (including operator)
Inner Turning Radius 6,350 mm (250")
Outer Turning Radius 9,144 mm (360")
Empty Vehicle Weight 22,800 kg (50,265 lbs)
Loaded Vehicle Weight 27,346 kg (60,288 lbs)
General Dimensions
Length 9,804 mm (386")
Width 2,438 mm (96")
Height (w/12:00 x 20 tires) 2,438 (96")
Engine
Make Mercedes
Model MB904
Type Tier 3
CANMET
MSHA Approved
Rated 173 HP @ 2,200 rpm
Maximum Torque 413 ft/lbs @ 2,200 rpm
Number of Cylinders 4
Displacement 4.2 L (260 in3)
Transmission
Make Dana
Type Powershift 4 speed
Front Axle
Make Dana
Capacity 15,000 kg (33,750 lbs)
Normal Rating
Oscillation 10°
Rear Axle
Make Dana
Capacity 15,000 kg (33,750 lbs)
Normal Rating
Tires
Standard 12:00 x 20 pneumatic
Brakes
Type Integrated wet disc immersed in oil in axle
Service Break Hydraulic applied, spring release
Parking/Emergency Break Spring applied, hydraulic release
Crane
Capacity 930 kg (2,050 lbs)
at reach of 3,600 mm (142")
Pipe Storage
Capacity 6 x 203 mm pipe x 6,096 mm long (8" x 240")
Hydraulic System
Type Variable displacement pump
Load sensing system with proportional controls
Pump Rating 140 Lrm (37 usgpm)
Max Hydraulic Pressure 200 bar (3,000 psi)
Hydraulic Tank Capacity 216 L (48 imp gal))
Electrical
Voltage 24V negative ground
Alternator 100A
Other Features Battery - 2 x 800 Ah
IP67 rated
Steering
Specifications Frame Articulation heavy duty large spherical bearing with dual HD steering cylinders with expander pins
Articulation 45°
Scissor Frame
Capacity 2,727 kg (6,000 lbs)
Specifications Solid arms with self lubricated bearings
Manufactured to CSA standards 457 mm (18”) single side shift
Scissor Deck
Size 1,778 mm wide x 4,877 mm long (70” x 192”)
Specifications Covered with wood planks, with dual hydraulic pipe jacks
Stabilizers
Front 1,219 mm (48") stroke
Rear 508 mm (20") stroke
Fuel System
Fuel Tank Capacity 203 L (45 imp gal)
Performance Curve — Travel Speed Fully Loaded
1st Gear 3 km/h (1.8 mph) on flat ground
3 km/h (1.8 mph) up ramp 20% grade)
2nd Gear 8 km/h (4.8 mph) on flat ground
3 km/h (1.8 mph) up ramp 20% grade
3rd Gear 13 km/h (7.8 mph) on flat ground
4th Gear lock out
Travel speed will vary depending on gross vehicle weight
Gradability
Specifications 20% +
Additional Standard Equipment
Carrier controls and instrumentation display
On board diagnostic and alarms
Engine, transmission and hydraulic monitoring
Hour meter
Audio back-up alarm and horn
Rear red LED running lights
Front and rear driving lights
Manual central lube points
Enclosed tool box
Emergency stop
Neutral safety
Engine high idle
Safety Standards
CAN/CSA –B 354.2 –01
CAN/CSA –M 424.2 M90
CAN/CSA –M 424.3 M90
Ontario Occupational Health & Safety Act and Regulation for Mines
Health and Safety Guidelines
SAE J185 Standards
Electrical Safety Code
Icon Titanium PT616 Brochure.pdf (516.7 KB)