Titanium ESV85 Electrician Service Vehicle

Available Options:

Open canopy ROPS/FOPS
Enclosed cabin ROPS/FOPS with AC and Heat
Torque lock up and engine brake for MB 904 engine
Firwin exhaust blanket minewrap 2
Firwin exhaust blanket minewrap 3
Firwin hard coat heat protection on engine turbo and manifold
Fire extinguisher 20 lbs with mounting bracket
Wheel chocks with mounting brackets
HID 2X work lights mounted on scissor deck
ANSUL 6-nozzle check fire suppression system with engine shut-down
ANSUL 6-nozzle manual fire suppression system with engine shut-down
Deltek LED strobe light
Upgrade to pneumatic operator suspension seat with seatbelt
Upgrade to pneumatic passenger suspension seat with seatbelt
Lincoln autolube
FLOMAX fast filling diesel
Additional 2X front headlights
Machine monitoring of hydraulic oil level, fuel coolant, engine air filter condition, hydraulic pressure and return filtration
4X polyurethane fill tires 12:00 x 20
Storage for 20 liter oil pail
12 volt power supply mine radio
3rd gear lock-out upon request
Link One part source file

General Specifications
Seating Capacity	2 (including operator)
Inner Turning Radius	4,984 mm (196")
Outer Turning Radius	7,640 (301")
Empty Vehicle Weight	18,182 kg (40,000 lbs)
Loaded Vehicle Weight	20,454 kg (45,000 lbs)
General Dimensions
Length	9,982 mm (393")
Width	2,438 mm (96")
Height (w/12:00 x 20 tires)	2,438 (96")
Engine
Make	Mercedes
Model	MB904
Type	Tier 3 CANMET MSHA Approved
Rated	173 HP @ 2,200 rpm
Maximum Torque	413 ft/lbs @ 2,200 rpm
Number of Cylinders	4
Displacement	4.2 L (260 in³)
Transmission
Make	Dana
Type	Powershift 4 speed
Front Axle
Make	Dana
Capacity	15,000 kg (33,750 lbs) Normal Rating
Oscillation	10°
Rear Axle
Make	Dana
Capacity	15,000 kg (33,750 lbs) Normal Rating
Tires
Standard	12:00 x 20 pneumatic
Brakes
Type	Integrated wet disc immersed in oil in axle
Service Break	Hydraulic applied, spring release
Parking/Emergency Break	Spring applied, hydraulic release
Crane
Capacity	930 kg (2,050 lbs) at reach of 3,600 mm (142")
Supply Deck
Specifications	Working deck 1524 mm x 2,438 mm (5' x 8')
Hydraulic System
Type	Variable displacement pump Load sensing system with proportional controls
Pump Rating	140 Lrm (37 usgpm)
Max Hydraulic Pressure	200 bar (3,000 psi)
Hydraulic Tank Capacity	216 L (48 imp gal))
Electrical
Voltage	24V negative ground
Alternator	100A
Other Features	Battery - 2 x 800 Ah IP67 rated
Steering
Specifications	Frame Articulation heavy duty large spherical bearing with dual HD steering cylinders with expander pins
Articulation	45°
Reel Device
Specifications	Reel mechanism rated for 1,588 kg (3,500 lbs) capacity
Scissor Frame
Capacity	907 kg (2,000 lbs)
Specifications	Double arms HSS tubing with self lubricated bearings and bushings Manufactured to CSA standards
Scissor Deck
Size	1,524 mm wide x 2,438 mm long (60” x 96”)
Specifications	Non slip expanded metal with independent 610 mm (24”) lateral shift on each side
Capacity	907 kg (2,000 lbs)
Stabilizers
Front	1,219 mm (48") stroke
Rear	508 mm (20") stroke
Fuel System
Fuel Tank Capacity	203 L (45 imp gal)
Performance Curve — Travel Speed Fully Loaded
1st Gear	3 km/h (1.8 mph) on flat ground 3 km/h (1.8 mph) up ramp 20% grade)
2nd Gear	7 km/h (4.2 mph) on flat ground 5 km/h (3.1 mph) up ramp 20% grade
3rd Gear	12 km/h (7.2 mph) on flat ground
4th Gear	lock out
	Travel speed will vary depending on gross vehicle weight
Gradability
Specifications	20% +
Additional Standard Equipment
	Carrier controls and instrumentation display On board diagnostic and alarms Engine, transmission and hydraulic monitoring Hour meter Audio back-up alarm and horn Rear red LED running lights Front and rear driving lights Manual central lube points Enclosed tool box Emergency stop Neutral safety Engine high idle
Safety Standards
	CAN/CSA –B 354.2 –01 CAN/CSA –M 424.2 M90 CAN/CSA –M 424.3 M90 Ontario Occupational Health & Safety Act and Regulation for Mines Health and Safety Guidelines SAE J185 Standards Electrical Safety Code

Titanium ESV85 Brochure.pdf (497.6 KB)